Search
Filters
Close

Kryptek Highlander - MPWHS - 4 Magnets

$114.43 Unit Cost
------------------------------------------------------------------------------------
See product from different angles in Cube View

About Our Camouflaged Components

NSI has extensively researched and tested hundreds of designs to develop a line of the highest quality camouflage patterns compatible with the Weaponholding System’s complex geometry. The result is a selection of great looking Weaponholders with field proven camouflage patterns covering a range of seasons and terrains.

Camo finished Weaponholders are a great fit for both outdoor and indoor use.  ATV’s, Truck’s, Tree Stands, Boats, Gun Safes, Cabins… anywhere you use, transport or store your weapons.  Now you can create a custom Weaponholder by choosing a Camo pattern and selecting the appropriate strap type and size.  Add a QR Tactical Strap, Mil Spec. VO Burn Rated Sheaths, Barrel Clip or an Adjustable Bungee to your MPWH. Build a Weaponholder to meet your needs. 

MPWHS – Kryptek Highlander™

Our Kryptek Highlander MPWHS has all of the terrific features of the MPWHS with a hydrographically applied Kryptek Highlander camo pattern.  Highlander Camo was specifically designed for use in a wide range of mixed terrains in varied regions and elevations.  The Highlander pattern combined with the architecture of the MPWHS and the uniqueness of immersion printing, guarantees, like fingerprints, every MPWHS will be unique. 

Kryptek patterns utilize a multi-directional design to effectively conceal in a multitude of terrains that have either a lateral or vertical flow.  The bi-level layering of the patterns incorporate background transitional shading and sharp random geometrical foregrounds to create a three dimensional effect that ensures the utmost in concealment at both close and long ranges.  These components combined with colorations selected and matched based on input from testing and observations from Operators in the field make Kryptek Camo the ultimate in passive battlefield deception.

Our Process

Even if you’re familiar with the hydrographic printing process, you may want to take a minute to read about our process.  Every dipped part undergoes 10 separate steps before its considered ready to ship. It’s not as simple as you might think.

Prior to applying the Highlander pattern, each component of the MPWHS undergoes several processes to ensure a quality result.  Each component is hand sanded, cleaned and masked to allow proper adhesion of a base coat, an important step required for proper adhesion of the pattern.

After the base coat has been applied and oven dried, the components are ready for dipping. Next we float the hydrographic film on the surface of the water in the dipping tank. When the film hydrates, activator is applied and the MPWH or BPK is slowly and carefully dipped in the liquefied film to receive the Highlander pattern.  Complex parts like the BPK and MPWH often require two dipping processes to achieve the desired look.

Immediately after dipping the component is washed to remove any excess activator and then racked to oven dry.  After the dipped parts are inspected they receive a clear acrylic top coat to protect them from normal wear and tear.  Once the Acrylic is applied the MPWH or BPK is racked again to oven dry. 

After drying, the components undergo one final inspection before final assembly and packaging. 

Multi-Purpose Weapon Holding System

The Multi-Purpose Weapon Holding System (MPWHS) was originally developed for military & tactical use.  Now that technology is available to the American Hunters and Marksmen. Its light weight, portability, extreme strength, flammability rating and multi-purpose design allow it to be functional in all climates and conditions. 

Waterproof and vibration resistant, the MPWHS has multiple attachment options offering temporary or permanent installation and retrofitting on almost any surface or any plane. ATV’s, Truck’s, Tree Stands, Boats, Gun Safes, Cabins, use your imagination. With a total weight of 11.4 ounces, the MPWHS allows you to Rethink weapon handling, maintenance and storage.  Use them anywhere you use your weapons. 

The MPWHS is comprised of two main components designed to work together to secure your weapon on any plane. The Multi-Purpose Weapon Holder (MPWH) secures the barrel of your weapon and the Butt Plate Kit (BPK) secures the butt stock.

MPWH

The MPWH is designed to secure the barrel of your weapon.  It is comprised of three main sections; the Upper Platform, the Connecting Stem and the Lower Platform. Each section contains several specialized features performing vital functions which work together to secure the barrel in the MPWH and the MPWH to a wide range of surfaces.  The MPWH ships with factory installed .750 Santoprene sheaths and a VS-11 strap.

Upper Platform

The Upper Platform contains a Track and Rail System, Locking Tabs, a Center Ridge, Threaded Inserts and Strap Slots.  Together these components are designed to secure the barrel of your weapon.

The Track and Rail System allows various barrel securing components (Sheaths & Clips) to be easily flame retardant Velcro straps installed or changed out in seconds. Components can be selected to accommodate conditions of use and a range of barrel diameters.  Locking Tabs are located at one end of the rail and are designed to engage with the Sheaths to assure proper positioning.  A Center Ridge contains Threaded Inserts to secure Barrel Clips. It also secures the two center rails of the Track & Rail System and has a strategically placed overmold to prevent barrel slippage.  The End Walls of the Upper Platform secure the outer two rails of the Track and Rail System and Strap Slots, which secure either regular or Quick Release –Tactical straps

Connecting Stem

The Connecting Stem has been designed to securely connect the upper and lower platforms of the MPWH.  It provides anchoring points for the System’s Adjustable Bungee Cords and creates spacing between the two platforms allowing the user to grasp the upper platform from below for quick and easy removal from a mounting surface. The Connecting Stem’s design incorporates center ridge lines and a series of buttresses on both platforms. These design features provide both superior strength and functionality.

Lower Platform

The Lower Platform contains several methods for securing the MPWH temporarily or permanently. These include Key Slots, Magnets, Locking Strips and the option of screws and bolts if the magnets are removed.  Additional mounting options include adjustable bungee cords and releasable cable/zip ties. The Lower Platform also features an overmold on the underside to prevent slippage of the unit and act as a gasket on permanent installations.

MPWH Accessory Kit

The MPWH ships with an Accessory Kit which contains:  Key Slot Screws, Prep Wipes, a Primer Stick, .75” x 2.6” Locking Strips and a complete set of instructions with a QR code that links to this website.  These items can be used to mount the MPWH in a number of locations. All components of the Accessory Kit are replaceable.

Butt Plate Kit – BPK

The BPK is designed to secure the butt stock of your weapon and to work in conjunction with the MPWH.  Together the system’s design allows you to mount your weapon vertically, horizontally, off the ground, even on the ceiling.  Rethink Weapon Storage!!

A combination of mounting methods gives you the option to secure the BPK temporarily or permanently.  They include Key Slots, Locking Strips, Screws, Bolts, Releasable Cable/zip ties and adjustable bungee cords. 

The underside of the BPK contains a T-shaped channel which houses a factory installed Locking Strip.  Locking Strips allow you to securely mount the BPK and remove it quickly.  Locking Strips can be mounted in several locations, allowing you to move your System to and from frequently used locations. Key Slot screws provide a similar option of moving back and forth between locations.  The BPK’s design incorporates screw/bolt holes on all surfaces, allowing you mount the BPK on any plane.

BPK Accessory Kit

The BPK ships with an Accessory Kit which contains:  Key Slot Screws, Prep Wipes, a Primer Stick, .75” x 3” and .75” x 4 “Locking Strips, and a complete set of instructions with a QR code that links to this website. These items can be used to mount the BPK in a number of locations. All components of the Accessory Kit are replaceable.

The MPWHS – Kryptek Highlander ships with the following:

1 - Multi-Purpose Weapon Holder with Kryptek Highlander Camo pattern

1 - VSC-11 Velcro Strap

1 - 1.25” x 2.6” Locking Strip factory installed

1 – MPWH Accessory Kit

1 Butt Plate Kit with Kryptek Highlander Camo pattern

1 VSC-10 Velcro Strap

1 T-Shaped Locking Strip factory installed

1 BPK Accessory Kit

About Our Camouflaged Components

NSI has extensively researched and tested hundreds of designs to develop a line of the highest quality camouflage patterns compatible with the Weaponholding System’s complex geometry. The result is a selection of great looking Weaponholders with field proven camouflage patterns covering a range of seasons and terrains.

Camo finished Weaponholders are a great fit for both outdoor and indoor use.  ATV’s, Truck’s, Tree Stands, Boats, Gun Safes, Cabins… anywhere you use, transport or store your weapons.  Now you can create a custom Weaponholder by choosing a Camo pattern and selecting the appropriate strap type and size.  Add a QR Tactical Strap, Mil Spec. VO Burn Rated Sheaths, Barrel Clip or an Adjustable Bungee to your MPWH. Build a Weaponholder to meet your needs. 

MPWHS – Kryptek Highlander™

Our Kryptek Highlander MPWHS has all of the terrific features of the MPWHS with a hydrographically applied Kryptek Highlander camo pattern.  Highlander Camo was specifically designed for use in a wide range of mixed terrains in varied regions and elevations.  The Highlander pattern combined with the architecture of the MPWHS and the uniqueness of immersion printing, guarantees, like fingerprints, every MPWHS will be unique. 

Kryptek patterns utilize a multi-directional design to effectively conceal in a multitude of terrains that have either a lateral or vertical flow.  The bi-level layering of the patterns incorporate background transitional shading and sharp random geometrical foregrounds to create a three dimensional effect that ensures the utmost in concealment at both close and long ranges.  These components combined with colorations selected and matched based on input from testing and observations from Operators in the field make Kryptek Camo the ultimate in passive battlefield deception.

Our Process

Even if you’re familiar with the hydrographic printing process, you may want to take a minute to read about our process.  Every dipped part undergoes 10 separate steps before its considered ready to ship. It’s not as simple as you might think.

Prior to applying the Highlander pattern, each component of the MPWHS undergoes several processes to ensure a quality result.  Each component is hand sanded, cleaned and masked to allow proper adhesion of a base coat, an important step required for proper adhesion of the pattern.

After the base coat has been applied and oven dried, the components are ready for dipping. Next we float the hydrographic film on the surface of the water in the dipping tank. When the film hydrates, activator is applied and the MPWH or BPK is slowly and carefully dipped in the liquefied film to receive the Highlander pattern.  Complex parts like the BPK and MPWH often require two dipping processes to achieve the desired look.

Immediately after dipping the component is washed to remove any excess activator and then racked to oven dry.  After the dipped parts are inspected they receive a clear acrylic top coat to protect them from normal wear and tear.  Once the Acrylic is applied the MPWH or BPK is racked again to oven dry. 

After drying, the components undergo one final inspection before final assembly and packaging. 

Multi-Purpose Weapon Holding System

The Multi-Purpose Weapon Holding System (MPWHS) was originally developed for military & tactical use.  Now that technology is available to the American Hunters and Marksmen. Its light weight, portability, extreme strength, flammability rating and multi-purpose design allow it to be functional in all climates and conditions. 

Waterproof and vibration resistant, the MPWHS has multiple attachment options offering temporary or permanent installation and retrofitting on almost any surface or any plane. ATV’s, Truck’s, Tree Stands, Boats, Gun Safes, Cabins, use your imagination. With a total weight of 11.4 ounces, the MPWHS allows you to Rethink weapon handling, maintenance and storage.  Use them anywhere you use your weapons. 

The MPWHS is comprised of two main components designed to work together to secure your weapon on any plane. The Multi-Purpose Weapon Holder (MPWH) secures the barrel of your weapon and the Butt Plate Kit (BPK) secures the butt stock.

MPWH

The MPWH is designed to secure the barrel of your weapon.  It is comprised of three main sections; the Upper Platform, the Connecting Stem and the Lower Platform. Each section contains several specialized features performing vital functions which work together to secure the barrel in the MPWH and the MPWH to a wide range of surfaces.  The MPWH ships with factory installed .750 Santoprene sheaths and a VS-11 strap.

Upper Platform

The Upper Platform contains a Track and Rail System, Locking Tabs, a Center Ridge, Threaded Inserts and Strap Slots.  Together these components are designed to secure the barrel of your weapon.

The Track and Rail System allows various barrel securing components (Sheaths & Clips) to be easily flame retardant Velcro straps installed or changed out in seconds. Components can be selected to accommodate conditions of use and a range of barrel diameters.  Locking Tabs are located at one end of the rail and are designed to engage with the Sheaths to assure proper positioning.  A Center Ridge contains Threaded Inserts to secure Barrel Clips. It also secures the two center rails of the Track & Rail System and has a strategically placed overmold to prevent barrel slippage.  The End Walls of the Upper Platform secure the outer two rails of the Track and Rail System and Strap Slots, which secure either regular or Quick Release –Tactical straps

Connecting Stem

The Connecting Stem has been designed to securely connect the upper and lower platforms of the MPWH.  It provides anchoring points for the System’s Adjustable Bungee Cords and creates spacing between the two platforms allowing the user to grasp the upper platform from below for quick and easy removal from a mounting surface. The Connecting Stem’s design incorporates center ridge lines and a series of buttresses on both platforms. These design features provide both superior strength and functionality.

Lower Platform

The Lower Platform contains several methods for securing the MPWH temporarily or permanently. These include Key Slots, Magnets, Locking Strips and the option of screws and bolts if the magnets are removed.  Additional mounting options include adjustable bungee cords and releasable cable/zip ties. The Lower Platform also features an overmold on the underside to prevent slippage of the unit and act as a gasket on permanent installations.

MPWH Accessory Kit

The MPWH ships with an Accessory Kit which contains:  Key Slot Screws, Prep Wipes, a Primer Stick, .75” x 2.6” Locking Strips and a complete set of instructions with a QR code that links to this website.  These items can be used to mount the MPWH in a number of locations. All components of the Accessory Kit are replaceable.

Butt Plate Kit – BPK

The BPK is designed to secure the butt stock of your weapon and to work in conjunction with the MPWH.  Together the system’s design allows you to mount your weapon vertically, horizontally, off the ground, even on the ceiling.  Rethink Weapon Storage!!

A combination of mounting methods gives you the option to secure the BPK temporarily or permanently.  They include Key Slots, Locking Strips, Screws, Bolts, Releasable Cable/zip ties and adjustable bungee cords. 

The underside of the BPK contains a T-shaped channel which houses a factory installed Locking Strip.  Locking Strips allow you to securely mount the BPK and remove it quickly.  Locking Strips can be mounted in several locations, allowing you to move your System to and from frequently used locations. Key Slot screws provide a similar option of moving back and forth between locations.  The BPK’s design incorporates screw/bolt holes on all surfaces, allowing you mount the BPK on any plane.

BPK Accessory Kit

The BPK ships with an Accessory Kit which contains:  Key Slot Screws, Prep Wipes, a Primer Stick, .75” x 3” and .75” x 4 “Locking Strips, and a complete set of instructions with a QR code that links to this website. These items can be used to mount the BPK in a number of locations. All components of the Accessory Kit are replaceable.

The MPWHS – Kryptek Highlander ships with the following:

1 - Multi-Purpose Weapon Holder with Kryptek Highlander Camo pattern

1 - VSC-11 Velcro Strap

1 - 1.25” x 2.6” Locking Strip factory installed

1 – MPWH Accessory Kit

1 Butt Plate Kit with Kryptek Highlander Camo pattern

1 VSC-10 Velcro Strap

1 T-Shaped Locking Strip factory installed

1 BPK Accessory Kit

Multi-Purpose Weapon Holding System – Kryptek Highlander™- 4 Magnets

MPWHS Specifications are broken into two sections: MPWH and BPK.

MPWH - Kryptek Highlander™ - 4 Magnets

Part #:
MPWHS-KH-4
Color: Kryptek Highlander™ Camo Pattern
Material: GF Nylon
Dimensions OD: Without Sheaths - L - 2.697" x W - 2.500" x H - 1.800"
  With Sheaths - L - 2.697" x W - 2.500" x H - 2.980"
Weight: Without Sheaths - 87.4 G = 3.08 oz.
  With .750" Sheaths & Strap -156.6 = 5.52 oz.
  Includes threaded inserts in center ridge and overmold on center ridge and bottom.
Temperature Range: -58°F to +440°F
Magnets: 4 - 0.499”x 0.125”NdFeB - Epoxy Coated
Sheaths Mounted: 2 - Santoprene - .750"
Strap: 1 - VSC-11
MPWH Accessory Kit: Item # AKC-MPWH
Dimensions: 4" x 6" Printed Zip Lock Bag
Contents: 2 - Isopropanol Prep Wipes
  1 - Primer Stick
  2 - Poly Bagged Key Slot/Mounting Screws
  2 - .75" x 2.6" Locking Strips
  1 - MPWHS Instruction Sheet

BPK - Kryptek Highlander™

Part #: MPWHS-KH-4
Color:
Kryptek Highlander™ Camo Pattern
Material: GF Nylon
Dimensions OD: L - 4.000" x W - 3.075" x H - 2.000"
Weight: With Strap - 185.6 G = 6.54 oz.
Temperature Range: -58°F to +440°F
Strap: 1 - VSC-10
BPK Accessory Kit: Item # AK-BPK
Dimensions: 4" x 6" Printed Zip Lock Bag
Contents: 2- Isopropanol Prep Wipes
  1 - Primer Stick
  2 - Poly Bagged Key Slot/Mounting Screws
  1- .75" x 3" Locking Strip
  1 - .75" x 4" Locking Strip
  1 - MPWHS Instruction Sheet

MPWHS FAQ

Q:  What is the best way to secure my System if I will be using it in different locations?

A:  It depends on the types of environments you will be using it in and the surfaces you will be mounting to.   Key Slot screws and Locking Strips can be installed in several locations and left in place for quick removal and remounting when you return.  In the field, the use of Locking Strips and Key Slots isn’t always an option.  In such cases, the Adjustable Bungee Cord and Releasable Cable/Zip Ties are quick, efficient and easy methods of mounting.  In short, different mounting methods may be better than others depending on location, environment and conditions.

Tip: Before mounting your system, take time to determine your options. If possible, mount it so the rear and side walls assist in securing your weapon.

Q: Can I use my MPWHS for anything besides storing my weapon?

A: Yes. You can use the MPWH while zeroing your weapon in place of sand bags. The system can also secure your weapon during maintenance.

Q: Why do I need to use the Straps on my MPWHS?

A: The Strapping System is designed to provide additional security and will provide at least 80 pounds of additional holding strength to each component of the System (the MPWH & BPK).  That’s a minimum of 160 pounds of additional holding strength

In vehicles, aircraft and ships, the straps reduce vibration, preventing damage to optics and helping to keep your weapon zeroed.

Q:  Do I have to use both parts of the System to secure my weapon?

A:  Yes. To properly secure a weapon both the barrel and the butt stock should be secured.

Q:  Are there any safety concerns when using the MPWHS?

A:  Before securing your weapon in the MPWHS, make sure both the MPWH and the BPK are securely mounted and will support your weapon. When using the System, follow all weapon safety rules and protocols. 

Q: If I lose or break any part of the MPWH or BPK, can I get a replacement part?

A: Yes, all components of the MPWH and BPK are replaceable with one exception.  The Magnets in the MPWH must be factory installed.

Q: Should I ever replace the Locking Strip.

A: Yes.  Locking Strip will wear out.  Locking Strip can remain strong for up to 1000 closure cycles depending on conditions and usage.  That said, use your judgement.  If the Locking Strip on your MPWH, BPK or any of the surfaces you’ve mounted strips to appears damaged or worn, replace it.  Even if there’s no visible sign of wearing and the holding strength seems to be weakening, replace the locking strip. This is a quick and easy step to insure your system maintains its peak performance.

Q: How do I clean my Locking Strip?

A: The two easiest and most effective methods are blowing compressed air or running water. This should help to loosen and remove dirt and debris.  Be careful when cleaning your Locking Strip not to damage the stems.  In the event you are unable to remove materials that are causing problems, remove and replace the Locking Strip.