Small Sheath .660
Q: What barrel diameters can the MPWH secure when the Small Sheaths are installed?
A: Small Sheath are designed to accommodate barrel diameters of .660”and smaller.
Q: How do I remove or replace a Sheath?
A: To remove: slide the Sheath off of the Rails in a direction away from the Locking Tab. To replace: line the Tracks in the Sheath up with the Rails on the MPWH and slide the Sheath onto the Rails from the end opposite the Locking Tabs. Make sure to slide the Sheath all the way onto the Rails until the Wedges on the Locking Tab engage with the Sheath.
Q: What is the temperature range of the Small Sheath?
A: The resin specification for the Small Sheath is - 58°F to 275°F. If storage of hot barrels with temperatures in excess of 275°F is a concern, you may want to consider the Military Spec. VO Burn Rated Small Sheath – Item # SHVO-66. Another alternative for storage of hot barrels is the Barrel Clip – Item # BC-75.
Tip: Always use the Strapping System when a weapon is engaged in the MPWH. The Strap will add at least 80 pounds of additional holding strength to you system.